We have here the first official update to Android 4.4.2 for Samsung Galaxy Note 3 N9005 model , an official update and preliminary test mode it can still contain some bugs or small bugs.
Just days after it appeared, the update itself or as a test leaked for Samsung Galaxy S4 and here we have the Samsung Galaxy Note 3 . If you want to know how to properly install be sure to continue reading this article.
essential requirements to keep in mind to meet
official update is only valid for the N9005 model Samsung Galaxy Note 3 , so if you do not want to have problems with brick not try it with another model Note 3 than the mark you here.
Before starting the upgrade process, make sure you have the battery charged to 100 x 100 and a backup of all your applications and data, and that is if the main process will not be erased if you have problems at startup will have to make a factory reset Wipe to solve it and in this case if all your applications, contacts and general data will be erased.
Files Needed
The first thing we need is the V3.09 version of Odin, if you have a different version do not use it as it is you could be half the process.
original firmware Android 4.4.2 N9005XXUENA6.
firmware flashing method
firmware flashing method is as simple as running with administrator Odin and connect your Samsung Galaxy Note 3 mode Download , remember that you access the Volume Down button combination’s Home’s Power.
Once lit
mode Download , you connect to the PC that it open Odin, we unzip the downloaded file Firmware and place in Odin files inside in the order you indicated below:
Add
AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 in box AP
Add
BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 in box BL
CP_N9005XXUENA2_REV03_CL1277177.tar.md5 Add to box CP
Add to
CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar.md5 CSC box
is very important that the RE-PARTITION this box not selected , I repeat: RE-PARTITION should not be selected
.
This screenshot is indicative as it belongs to the same process on a Samsung Galaxy S4. I’ve used it more than anything for you to see the placement of the files and re-partition should be unchecked.
Now we will just have to click on the Start button and wait patiently for the process to complete without interruption. By this I mean that you do not let your computer run out of battery, Windows try to hibernate or suspend session or anything like that.
will know that the process is over and we can disconnect the USB Cable when Odin we return the word PASS at the top left.
If restarting
stay us bootlop in your own recovery screen, from doing the same will solve both Wipes available Wipe data factory reset and Wipe cache . Now we are already reboot as normal in this latest version of Android 4.4.2 Kit Kat .
More information – Filtering the Android 4.4 firmware for Samsung Galaxy KitKat S4
No comments:
Post a Comment